Jiangsu Baodie Automation Equipment Co., Ltd.

  • linkedin
  • twitter
  • facebook
  • youtube
English
I-3D Printer Filament Extrusion Line (Uhlobo oluMiselweyo) Umfanekiso obonakalayo

I-3D Printer Filament Extrusion Line (Uhlobo oluMiselweyo)

  • Isantya semveliso:

    DN1.75mm 120-150m / min, DN3.0mm 45-55m / min.

  • Lawula ukuchaneka:

    Φ3.0 mm ukuya kwi-2.9 mm, 1.70 ukuya kwi-1.80 mm. (Ubukhulu ≤± 0.04mm, uMyinge≤± 0.03mm, CPK≥1.6).

Inkcazo:

Ushicilelo lwe-3D, oluluhlobo lobuchwepheshe obukhawulezayo bokuchwetheza, luhlobo lobugcisa bokushicilela obusekwe kwifayile yemodeli yedijithali, kusetyenziswa umgubo wesinyithi okanye izinto zokuncamathelisa zeplastiki, ukwakha into ngenyathelo ngenyathelo.

Umshicileli we-3D sisixhobo esinokuthi "siprinte" into ye-3D, isebenze njengeteknoloji yokwenza i-laser, ithatha inkqubo ye-hierarchical, umgaqo wokwenziwa kwe-superposition, ngokwandisa inyathelo ngesinyathelo se-stack ukuvelisa iyunithi ye-3D.

Itekhnoloji yoshicilelo ye-3D ngokwayo ayinzima kakhulu, kodwa izinto ezikhoyo ezidliwayo zibe nzima. Izinto ezisetyenziswayo zomshicileli eziqhelekileyo yi-inki kunye nephepha, kodwa izinto ezisetyenziswayo zeprinta ye-3D ubukhulu becala ziyiplastiki kunye nolunye umgubo, kwaye kufuneka zibe ngokucubungula okukhethekileyo, kunye nemfuno ephezulu yesantya sokuphendula.

ukusetyenzwa, kwakhona imfuneko ephezulu yesantya ephilisayo reaction.

● Ubume be-3D yomshicileli we-Filament: Ucingo oluqinileyo olujikelezayo

● Izinto eziluhlaza: i-PLA, i-ABS, i-HIPS, i-PC, i-PU, i-PA, i-PEEK, i-PEI, njl.

● OD: 1.75 mm / 3.0 mm.

Ukucaciswa kwesicelo sefayili yomshicileli we-3D kufuna ukuba izixhobo ze-extrusion zibe neempawu ezisisiseko "zolawulo oluchanekileyo kunye nokusebenza okuphezulu".


Iinkcukacha zeMveliso

Iithegi zeMveliso

Ulwazi lweMveliso

Ubume be-3D yomshicileli weplastiki i-filament yintambo ejikelezayo eqinileyo okwangoku, eyona nto iphambili i-PLA, i-PVA, i-HIPS, i-ABS, i-PC, i-PA, i-TPU njl., iimveliso zivela kwi-1.75 mm ukuya kwi-3.0 mm ububanzi. I-BAOD EXTRUSION ibonelele ngeseti yokuqala ye-3D PRINTER FILAMENT yomatshini wokwandisa kubathengi ngo-2009, emva kwexesha elide eliqhubekayo lokuphucula uqwalaselo lwezixhobo kunye nobuchwepheshe be-extrusion, senze iseti egqibeleleyo ekhethekileyo ye-3D yoshicilelo lwe-extrusion line, umdlalo kunye nokuxhasa isikrufu esahlukileyo kwaye itekhnoloji yokubumba ifa, inokwanelisa ngeentlobo ezahlukeneyo zemveliso yezixhobo.

asf
asfa
aa

Yethuinzuzo

sagyfa

Iimpawu zoMshini woMshini

1. I-SERVO epheleleyo yokuqhuba i-driveis ixhotyiswe kumgca womatshini opheleleyo, ikhokelela ekuqhubeni okuphezulu okuzinzile kwindawo nganye kumgca we-extrusion, njenge- melt extruding, i- melt metering, ukutsala, njl.;

 

2. Exhotywe ngenkqubo yempompo yokulinganisa, iphindwe kabini iqinisekisa ukuchaneka kokuhamba okunyibilikayo, okwangoku ukwandisa uxinzelelo lwentloko yokufa ukuze ugweme umngxuma ngaphakathi kwingcingo;

 

3. Ixhotyiswe nge-laser gauge ye-diameter ye-intanethi kunye nomsebenzi wokulawula impendulo yobubanzi obuzenzekelayo, lawula ukunyamezelwa komda kwixabiso elincinci, ukuphakamisa umgangatho we-automation yomgca wonke;

 

4. Ukujija kunye nokunqumla nge-SERVO drive & PLC ulawulo lweprogram ukuqonda ngokuchanekileyo kwi-intanethi kunye nocwangco (ucocekile) ukujika, ukujika okukhoyo kuzo zombini i-spool enkulu kunye encinci.

KANINZI

Iimveliso ezinxulumeneyo

Cofa u-enter ukukhangela okanye i-ESC ukuvala